Ideal for: Wood Floors Paneling Cabinets Furniture Yachts Decks

Directions: Stir thoroughly before and during use. Do not shake. For maximum durability, polyurethane should be applied to raw wood since the finish coat will only be as durable as the undercoat. Where possible remove old varnish, shellac, lacquer, etc. sand surface smooth. Apply Dunham’s Clear Marine Finish Polyurethane with a clean brush. Flow on a uniform even coat of Dunham’s Clear Marine Finish Polyurethane plastic coating.

This contains petroleum solvents. Keep away from heat and open flame. To avoid breathing vapors or spray mist, open window and doors to use other means to ensure entry of fresh air during application and drying. Always wear respiratory protection. If you experience eye watering, headaches, dizziness or nausea, increase fresh air or wear respiratory protection (NIOSH/MSHA TC23C or equivalent) or leave the area. Close container after each use. Avoid prolonged contact with skin. Do not take internally. Use only with adequate ventilation KEEP OUT OF THE REACH OF CHILDREN

If you scrape sand or remove old paint, you may release lead dust. LEAD IS TOXIC, EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto: www.epa.gov/lead.