Surface Preparations: for best results, DUNHAM QUICK SEAL WATERBORNE SANDING SEALER should be applied at a temperature of between 60-80 degrees F.

Pour directly from can into a plastic pan to prevent rust contamination. Then use a polyester brush, roller, sprayer or synthetic applicator at room temperature as indicated above, and not in direct sunlight. Mixing before use stir thoroughly: stir occasionally during use. Apply a thin coat in the direction the wood grain. Allow sealer to dry 1 hour prior to sanding and applying top coat. Do no thin. This should be held at room temperature for 72 hours before application.

400-500 square feet per gallon.

Drying Time: Allow 30-45 minutes touch, 1 hour for sanding-may be prolonged dependant on ventilation and relative humidity greater the 50% properly prepare surface according to National Wood Flooring Association (NWFA) standards. Surface must be free of

Use soap and water to clean tools.

CAUTION: Vapors may be harmful or cause eye and skin irrigation. To avoid breathing of vapors or spray mist, open windows or doors or use other means to ensure fresh air entry during application and drying. Close container after each use. FIRST AID: If swallowed, immediately give 1 or 2 glasses of water and call physician, hospital or Poison Control Center for ways to induce vomiting. Avoid contact with skin In case of eye contact, flush immediately with plenty of water for at least 15 minutes and call a physician; for skin contact. If you experience eye watering, headaches or dizziness; increase fresh air or war respiratory protection (NIOSH/MSHA TC 23C or equivalent) or leave the area.

WARNING: If your scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC, EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto: www.epa.gov/lead. Avoid breathing vapors or spray mist, open window and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh airs of ear a properly fitted vapor/particulate respirator approved by NIOSH for use with paints or leave the area. In all cases follow respirator manufacturer's directions for respirator use. Close container after each use.