Great for use on almost any surface or location including: Laundry Rooms, Kitchens, Bathrooms, Basement and Attics, Drywall/Plaster, Wood, Concrete and Over Existing Paint.

Shake or stir well and apply using synthetic brush, roller or sprayer. For airless spraying, use .017 tip and high medium (2000-2600 PSI) pressure. Apply when air and surface temperature are between 50 and 90 degrees RH <80% may be applied over slightly damp surfaces. No priming required, adheres to any sound surface even glossy paint and tile without sanding. Spot prime and seal stains Dunham Stain Killer primer sealer before painting. Tinting: May be tinted to off white, pastel or medium colors. Start with 75 % of the tinting formula for a given color and adjust if necessary Maximum tint-4 oz. per gallon makes sure to box (combine) if multiple containers are tinted.

Approximately 400 square feet. Per gallon may vary with application method and surface porosity.

Dries to the touch in about 15 minutes, can be recoated in 45 minutes, can be recoated in 45 minutes.

Clean application tools, splatter and spills immediately with warm water and liquid detergent; rinse with water. Follow equipment manufacturer’s directions to clean spray equipment. Remove dried product with heavy duty ammoniated household cleaner; rinsed with water. Limitation: Not intended for application to floors or any surface subject to water immersion or prolonged contact with water including shower enclosures, saunas, or steam rooms. Not recommended for use in HVAC ductwork.